CAPA | Corner Soap Dish Important Info

Congrats on your new soap dish! Below are a few tips and important info to keep your dish lasting as long as possible!

Digital illustration of a box with stars and sparkles coming out, with a blue accordion below the box.

1: Unbox Your Soap Dish

Be careful when unboxing, we pack everything in there well to ensure nothing happens to it during shipping.

Close-up of a corner of a kitchen countertop with a metal trim, with a black arrow pointing to the edge of the counter and a blue accordion-style tube or cover at the bottom left.

2: Place Dish In A Corner In The Bathtub

Place your soap dish in the corner of your bathtub or shower. The length of each side of the 90° corner is 110mm and it was designed to fit on a bathtub rim of 4 to 5cm minimum. Once in the corner, place your soap on top and your done! NOTE: The side edges of the dish should be pointing down to the floor!

Water droplet with downward arrows and rain droplets indicating water or drainage

3: Keep Moisture To A Minimum

At least once a week, clean and fully dry the soap dish to prolong its life and prevent bacteria from growing on it. If you keep moisture in it for too long, it could start seeping through the soap dish!

Red thermometer icon indicating a high temperature level.

4: Don’t Let It Get Hot!

Don’t let your phone stand get in temperatures over 100°F or you could risk the stand getting too hot and warping! Keep it at room temperature and avoid direct faucet contact.

About your 3D Printed Soap Dish

At Firecloud Printz LLC, we use high-quality PLA (Polylactic Acid) for the soap dish. PLA is a favorite in the 3D printing world because it allows us to capture incredible detail and vibrant colors while staying environmentally conscious.

Why We Use PLA

  • Eco-Friendly: PLA is a bioplastic derived from renewable resources like corn starch. It’s a more sustainable choice compared to traditional petroleum-based plastics.

  • Stunning Detail: This material allows for sharp lines and a smooth finish, ensuring your item looks exactly as intended.

  • Safe for the Home: PLA is non-toxic and produces no harsh chemical odors, making it perfect for indoor display and use.

Care Instructions & Tips

To keep your 3D print looking its best, please keep the following in mind:

  • Keep It Cool: PLA has a low melting point. Please avoid leaving your print in high-heat environments, such as a parked car on a hot day or near a direct heat source, as it may soften or warp.

  • Indoor Use Recommended: While durable, PLA can become brittle if left in direct sunlight (UV rays) or outdoor elements for extended periods.

  • Strength & Handling: PLA is very rigid and strong, but it can be brittle if dropped on hard surfaces or subjected to heavy impacts. Treat your print with care!

Thank you again for choosing Firecloud Printz for all of your 3D printing needs! We look forward to your next 3D printing needs!