Coregrid Modular Holder Important Info
Congrats on your new Coregrid holder! Below are a few tips and important info to keep your holder lasting as long as possible!
1: Unbox Your Coregrid Holder
Be careful when unboxing, we pack everything in there well to ensure nothing happens to it during shipping.
2: Place Modules In The Base Tray
Place Modules in base tray as shown in the image above. If you bought the glasses module, place that in the center instead of the regular bin.
NOTE: If you bought the glasses holder, the holder will only fit in one direction in the center, if you have to force it and the L containers start coming up, rotate the glasses holder 90 degrees and insert it again in the center.
3: Don’t Let It Get Hot!
Don’t let your Coregrid get in temperatures over 100°F or you could risk the stand getting too hot and warping! Keep it at room temperature and avoid direct faucet contact.
About your 3D Printed Coregrid
At Firecloud Printz LLC, we use high-quality PLA (Polylactic Acid) for the Coregrid. PLA is a favorite in the 3D printing world because it allows us to capture incredible detail and vibrant colors while staying environmentally conscious.
Why We Use PLA
Eco-Friendly: PLA is a bioplastic derived from renewable resources like corn starch. It’s a more sustainable choice compared to traditional petroleum-based plastics.
Stunning Detail: This material allows for sharp lines and a smooth finish, ensuring your item looks exactly as intended.
Safe for the Home: PLA is non-toxic and produces no harsh chemical odors, making it perfect for indoor display and use.
Care Instructions & Tips
To keep your 3D print looking its best, please keep the following in mind:
Keep It Cool: PLA has a low melting point. Please avoid leaving your print in high-heat environments, such as a parked car on a hot day or near a direct heat source, as it may soften or warp.
Indoor Use Recommended: While durable, PLA can become brittle if left in direct sunlight (UV rays) or outdoor elements for extended periods.
Strength & Handling: PLA is very rigid and strong, but it can be brittle if dropped on hard surfaces or subjected to heavy impacts. Treat your print with care!